During Australia's hottest months industrial, commercial and even domestic HVAC units struggle to cope due to increased head pressures caused by high ambient temperatures, but not OZmist's!
When air temperatures rise to over 60°C, the efficiency of standard condenser coil units drops dramatically from the design set point of only 46°C. Units that reach these temperatures are under threat of shutting down and costing businesses thousands of dollars.
OZmist condenser cooling systems have been installed in major data centres, shopping centres and commercial buildings around Australia.
A correctly installed HVAC pre-cooling OZmist system can save you up to 30% on your building air conditioning, refrigeration energy and running costs.
HOW IT WORKS
The OZmistHVAC pre-cooling systems use "Flash Evaporation" technology to pre-cool the air around the condenser units.
Individual misting lines are fitted around each condenser coil, supplying water that is pressurized to over 1,000 psi.
The water is then forced through specially designed nozzles creating an ultra-fine mist that flash evaporates hot air particles.
OZmist Pre-Cooling Facts:
Reduction in temperature of approx 10 to 15°C at the coil face.
Energy reduction drops, saving as much as 30%.
Increases the efficiency of air conditioning units by as much as 30%.
Improves the capacity of under-performing refrigeration data centre and HVAC units under high ambient conditions.
Reduces system downtime.
Improves occupant comfort level.
Environmental benefits - lower kW consumption reduces your carbon footprint.
Reduction in water usage when compared to traditional cooling methods.
Can be retrofitted to existing condensers without disruption to the refrigeration, data centre or HVAC system.
An independent study conducted also found that pre-cooling could increase the co-efficient performance by up to 30%, and also generate significant energy savings by using mist to pre-cool the ambient air temperature.
Want to find out more about HVAC Pre-Cooling? Simply contact us!