Learn about how OZmist Australia can help your Venue, Worksite or Event. For info on Support, Sales or Hire Contact Us
Best Cooling Solution For Factories, Workshops, Sheds and Indoor Sites.
Key Features
These fans will ensure you workers stay cool, which boosts comfort, morale, productivity, health and safety. Being industrial they sure offer a lot of bang for their buck, with powerful airflow ^ maximum reach. They are an indoor only solution so slightly louder than our Outdoor KTW Range which are purposely made for restaurants, beer gardens, surf clubs, alfresco dining and public venues.
| Mist Throw | |||
|---|---|---|---|
|
Mist Throw |
8M - 10M |
Mobility |
Wall Mount |
|
Oscillation |
On/Off Control |
Pump |
N/A |
|
Water tank |
N/A |
Mounting
Unit |
N/A |
Key Features
| Mist Throw | |||
|---|---|---|---|
|
Mist Throw |
8M - 10M |
Mobility |
Wall Mount |
|
Oscillation |
On/Off Control |
Pump |
N/A |
|
Water tank |
N/A |
Mounting
Unit |
N/A |
Our KTW Misting Fan has two available models – KTW 2460 and KTW 1845, both designed to be used with OZmist’s High-Pressure Pump Module to give the most efficient cooling experience. Pumps provide High-Pressure water to the Misting Nozzles fixed to the face of the fan and expel an Ultra-Fine Mist that will travel further and will evaporate quicker giving you the ultimate cooling solution.
The KTW range of fans come in a Wall Mount option only, each Fan comes fitted with one of our Stainless Steel 6 Nozzle Misting Ring as standard. If a Misting Ring is not required, each KTW Fan can be purchased without the Misting Ring.
The Wall Mount Fan is simple to install, with four bolts to anchor the mounting plate. Once the plate is secured the Fan head can be positioned over the pole, the holes aligned and tightened accordingly. OZmist recommends that both KTW Fans be installed at a minimum height of 2200mm, measuring from the centre of the Fan to the ground. And that there be at least 250mm between the top of the Fan cage and any ceilings or obstructions. Everything you need to install the KTW Fan is included in the product box. All KTW fans are covered by a 12-month warranty.
Each Fan has an inline controller with three adjustable speeds to choose from that when not in use slides into the rear of the motor. The Oscillation can be toggled by push/pull switch on top of the Fan Motor.
Yes, it is possible to purchase a KTW Fan without the Stainless Steel Misting Ring and fit one of OZmist’s Low-Pressure Misting Rings instead.
It must be noted that the Low-Pressure Mist Rings can cause wetting on some surfaces.
| Dimensions |
|---|
|
Dimensions |
|
Length: 660mm
Width: 660mm
Height: 300mm |
|
Water Tank Capacity: |
|
N/A |
|
Weight: |
|
Dry Weight: 17kg (per Fan with Stainless Steel Mist Ring) |
| Dimensions |
|---|
|
Flow Rate: |
|
With Stainless Steel Misting Ring 1 x Fan @ 1000psi = 0.336L/pm
|
|
Transport: |
|
N/A |
|
Generator: |
|
230V / 50Hz 0.57A 127W |
|
Speed Max: |
|
3 Speed Levels: Low Medium High |
Our Industrial Fan Range is designed specifically for workshops, warehouses, sheds, factories and worksites, to provide ample coverage and cool airflow to everyone. Available in 650mm and 750mm diameters, they can be purchased with our without misting rings, but for quality results we recommend pairing with OZmist’s 6 nozzle stainless steel misting rings and High Pressure Pump.
Providing a huge lift over conventional fans which move the warm air only, OZmist’s high pressure mist cools the ambient temperature immediately by approx 10°C, providing a much more comfortable workplace, increased productivity, staff morale, even less sick days and absenteeism over summer.
Industrial fans are most commonly used in factories while our KTW fans are ideal in public areas and outdoor environments.
|
Used For Indoor & Outdoor Areas |
Mist Throw 9m |
|---|---|
|
Tank Size 70L Portable /8L Wall Mount |
Mobility Portable & Fixed |
|
Used For Indoor & Outdoor Areas |
Mist Throw 8-12m |
|---|---|
|
Tank Size 50L |
Mobility Portable |
With an experienced and dedicated team, OZmist thrives on the best result & support for every one of their clients. Our team has over 20 years experience in providing misting & cooling solutions for industrial, commercial, and domestic applications around Australia.
Victoria: (Head Office) 31 Baker Street, Wangaratta VIC 3677
OZmist Qld: The Gap, Qld, 4061
OZmist NSW: Five Dock, Sydney, 2046
OZmist South Australia: Belair 5052
Phone: 1300 306 478
Email: [email protected]
© 2022 Copyright OZmist Pty Ltd, All Rights Reserved. Designed and Developed by:
